Mesh Human Phantoms with MCNP - 2012
This report demonstrates these new capabilities of MCNP, specifically the use of unstructured mesh human phantoms for health
physics and medical applications.
Multiphysics
Modeling of Dock Door Bracings for Hurricane Winds - 2012
The wind-load response of braced and un-braced loading dock doors installed in industrial facilities in hurrican-prone areas was evaluated using Abaqus.
Simulation of the Quasi-static Crushing of a Fabric Composite Plate - 2011
Simulation of the Quasi-static Crushing of a Fabric Composite Plate is a methodology for modeling the crushing behavior of composite structures using
Abaqus/Explicit. Very good quantitative and qualitative agreement between the
numerical results and experimental data is shown, demonstrating the utility of
Abaqus/Explicit for assessing the crashworthiness of composite structures and
reducing the amount of costly experimental testing.
Abaqus/Explicit. Very good quantitative and qualitative agreement between the
numerical results and experimental data is shown, demonstrating the utility of
Abaqus/Explicit for assessing the crashworthiness of composite structures and
reducing the amount of costly experimental testing.
Isight Optimization of Material Parameters used in the Abaqus Worldwide Side Impact Dummy - 2012
An automated Isight optimization workflow for the calibration of material
parameters is presented. Using component models from the Abaqus Worldwide Side
Impact Dummy (WorldSID) we will validate one of the calibrated material
parameters by comparing the response of several dummy sub-assemblies with
experimental data.
parameters is presented. Using component models from the Abaqus Worldwide Side
Impact Dummy (WorldSID) we will validate one of the calibrated material
parameters by comparing the response of several dummy sub-assemblies with
experimental data.
Fluid-Structure Interaction Analysis of a Prosthetic Aortic Valve using Abaqus/Explicit Smoothed Particle Hydrodynamics - 2012
The smoothed particle hydrodynamic (SPH) analysis method in Abaqus/Explicit
overcomes this difficulty. In this Technology Brief, the SPH
technique will be used to determine the FSI response of a generic prosthetic
heart valve.
overcomes this difficulty. In this Technology Brief, the SPH
technique will be used to determine the FSI response of a generic prosthetic
heart valve.
Abaqus/Standard Coupled Simulation of Thermally Assisted Gravity Drainage of an Oil Sand Formation - 2012
Abaqus/Standard provides an analysis capability that allows for coupling between
heat transfer, pore fluid flow, and displacement. We demonstrate how this capability can be used to simulate the thermally
assisted gravity drainage of an oil sand formation.
Two-Pass Rolling Simulation - 2012
Hot rolling is a basic metal forming technique that is used to transform
preformed shapes into final products or forms that are suitable for further
processing. The important aspects of this manufacturing operation are the
elongation and spread of the material during the rolling process.
Fully Coupled Fluid-Structure Interaction Analysis of Wind Turbine Rotor Blades-2012
A fully coupled fluid-structure interaction analysis of a wind turbine rotor is
presented. Abaqus/Standard and STAR-CCM+ are directly coupled through the
SIMULIA co-simulation engine. With this approach, a high fidelity modeling
strategy can be used to develop an accurate understanding of the blade dynamics.
presented. Abaqus/Standard and STAR-CCM+ are directly coupled through the
SIMULIA co-simulation engine. With this approach, a high fidelity modeling
strategy can be used to develop an accurate understanding of the blade dynamics.
Simulation of the Ballistic Perforation of Aluminum Plates with Abaqus/Explicit -2012
Simulation of the Ballistic Perforation of Aluminum Plates describes Abaqus/Explicit modeling of the ballistic impact of metal projectiles
on metal targets. It will demonstrate the utility of Abaqus/Explicit as a tool
for reducing the amount of experimental testing as well as assessing the
projectile residual velocities and time-resolved kinematics.
on metal targets. It will demonstrate the utility of Abaqus/Explicit as a tool
for reducing the amount of experimental testing as well as assessing the
projectile residual velocities and time-resolved kinematics.
Pipeline Rupture in Abaqus/Standard with Ductile Failure Initiation-2012
Pipeline Rupture in Abaqus/Standard will be used to predict the burst pressure of a steel pipe-line
with a notch-type defect. A ductile damage initiation criterion is used, and
favorable comparison with available experimental data will be shown.
with a notch-type defect. A ductile damage initiation criterion is used, and
favorable comparison with available experimental data will be shown.